Z Mesh

You can use the Z mesh floor heating system for interiors or on the roof for melting snow. Z Mesh is a one of its kind heating system that offers optimum warmth and comfort in homes and office buildings. It is easy to install and adds value to your home as well. Almost all kinds of flooring will go with the Z mesh including laminates and you do not require any floor build up. Installation is directly onto the subfloor and glue or staples can be used to keep it in place.

The Z mesh is a low voltage element operating under 32 volts. The most innovative system to date, it consists of a bronze screen that you can roll for ease of installation. It is available in 9 or 12 inch widths and the length can vary depending on your room size. From 30 to 637 square feet in size, any room size can run on a single thermostat.

The mesh is as thin as a screen door so it does not raise your floor or even be visible when you install your flooring over it. No matter what kind of flooring you install over it, carpeting, tiles or hardwood; you are bound to enjoy the warmth of the Z mesh.

Installing flooring over the Z mesh does not pose any threats of damage to it. You can easily install your flooring over it by gluing, stapling or nailing without damaging the heating element. Unless there is contact with electrically conductive material, there is no damage. Z mesh also offers durability and can stand a lot of wear and tear. Since it is operated on very low voltage, it is safe to even touch it while it is operating.

A computer system runs the transformer for the Z mesh heating system. Install your transformer in a utility area of your home like the attic or the garage. The computer is always monitoring the unit and diagnoses it as the problem arises. Any abnormal functioning results in its automatic shutting off. This is a great safety feature for those concerned about their family’s well being. There is a LED light panel that updates you at all times on the status of its operation.

It is quite easy to install the Z mesh and the process is not time consuming either. Begin with reading the instruction manual thoroughly before you start any procedures for installation. Determine the requirement of Z mesh in square units before you order it. Get an electrician to help you install the power required for the control box. A licensed electrician from your locality should be able to handle this. After laying down the Z mesh on the subfloor continue to install the transformer and the control box as well as the thermostat. The instruction manual has very clear instructions. After the unit is installed, move on to installing the flooring of your choice on top of it.

If you live in colder climates, this is a great heating alternative even as you walk barefoot across your floor. Z mesh is a strong and durable heating system that can be easily installed at your home or office. Z mesh is also installed in shingle roof deicing.